vizskywalker

I've recently decided to make my site 100% support CSS 2.1 standards as well as xhtml 1.0 standards. However, when I load my site in IE, some of the styles don't show up properly. For example: I have a tag defined, and then I redefine it with :hover, yet IE doesn't activate the :hover portion. Is there anywhere I can go to find out which standards are supported by which browsers?~Viz

I'm actively using firefox, but trying to get the page to work for all sites (so in the end I'l probably wind up using a selected css stylesheet).Here's additional data I have for you:1) <element>.currentStyle.<property> works for IE2) <element.style.<property> = foo seems to work anywhere (seems to being the key word, and granted this is assignment)3) I finally got the method for firefox working, thanks.Which would you recommend:A) On loading the page, going thorugh and using setProperty() in conjunction with a browser detection routine and browser specific code to set the properties so later I can just use etPropertyValue() Simply using the browser detection and browser speciific code when I need itThanks.~Viz

Because a; directories are readable in XP Pro and Home by anyone, as long as you are simply copying files, and they are not currently used system files, the copy will work, no matter where the data comes from. If you successfully boot from home (in which case the Pro HD is secondary) The Pro HD will simply be assigned a new drive letter and will be accessible via that drive letter. Then you can browse and copy files from it, even though it is Pro and you are in Home since they both use NTFS (I've done something similar and am 99.9% sure it will work). The only possible shortfall I see is if the reason the HD is not booting in the first place is because of a corrupt partition table or File System, in which case windows (any version) will not be able to browse the system, and most likely neither will any Os. In this case, you must do a byte by byte read of the HD to find files and extract them. But I doubt based on the error message that that is what's wrong. Try it, the worst that can happen is that you'll be no better off than you were.~Viz

I have a site I'm trying to get up and running (http://forums.xisto.com/no_longer_exists/) and I need to have access in javascript to the various css propertis for the elements on the page. So I tried good old <element>.style,<property> but low and behold it didn't work, probably, as I later found out, because it is an external stylesheet (which you are supposed to do). So, to learn more about what was going on, I simply outputed <element>.style and received "[object CSSStyleDeclaration]" as the result. So I serached CSSStyleDeclaration and found this. as well as some other sites saying the same thing in less detail. So then I tried <element>.style.getPropertyValue("<property>") and I received blank output. Now, two questions: 1) Why am I receiving blank output? 2) what can I do about it? ~Viz

It shouldn't cause problems. As far as file storage goes, both Home and Pro use NTFS,so the data will be fine. The issue comes with boot order. Obviously the bad HD is still bootable (according to BIOS) or windows never would've had a chance to display BSoD. So make sure when you put it into the new shell, you make it the slave HD. Also, make sure BIOS is set to boot from the master HD before the slave HD (some BIOSes identify HDs according to windows nomnclature in which case C: is primary).~Viz

Try subscribing to posts you are interested in, and find new posts through the list at the bottom of the main page. Maybe then it won't seem so busy.~Viz

There are also ways to soften CRTs, especially depending on the grpahics card. This makes them easier to look at, but gives them similar attributes to LCDs. Dimming the brightness may also help. Then, when you play a game wou can simply raise the brightness and restore the other settings.~Viz

If you only want to around $150 then CRT is the way to go. I prefer CRTs anyway, especially for games, as they have a better color quality and brightness, as well as a better refresh rate. Think about this, if you take a laptop out in the sun, you can't see the monitor, but if you take a CRT out in the sun, you can see the image on the monitor, albeit faded. LCDs serve one purpose to me, less desk space. They do have problems that are petty resolved in CRTS like dead pixels, and they are more expensive and less capable. So unless space is an issue, I vote CRT.~Viz

Yes, Safe Mode is now an SVGA mode. It used to be a vga mode. On that note, when you press the f8 key and windows lets you boot into "VGA Mode" why is it called vga mode? It's 640 x 480 x 256 bit color at worst, which is already SVGA.~Viz

That's what I said vujsa! Glad it's working now. If anymore problems arise just post back here.~Viz

Instead of using fwrite() to create the png, you need t use imagepng as what you are actually saving is an image resource, not the png image. Simply use this format: imagepng($image, $filename) where $image is the png image resource and $filename is the name of the file you want to save it to.~Viz

As far as the first thing goes, all I can do is make sure that an Admin sees this post. As for the second request, I'm afraid it is DENIED. I didn't highlight that to go off on you, but to make sure people see it, as has been noted many times, because of our credit system, and edit button allows people to cheat and gain excess credts by making long posts and then editing down to something small and meaningful. To make a script to detect this use of an edit button is too involved and not worth it. If you want to make an edit simply create a new post with the changes to make and report that post. A moderator will see to it that the changes are made promptly. ~Viz

I understand your feeling, that's what I had to do as well.~Viz

sounds like an error occuring pretty soon after protected mode is enabled, ty last known good configuration like MC said. If that doesn't work, boot to the basic Safe Mode and login as administrator, then just shutdown. Then try booting again.~Viz

I've also had this problem. Unfortunately for your situation, a)the hints about uncacheing and shadowing, etc. seldom work. there are various messages displayed on BSoD, if you could give us the specific erro emssage it would helpful and we could tell you how to fix it.~Viz

Astahost is a a technology and computers forum. As such, you only get credits for technologically and computer related posts. However, we recognize the fact that people like to talk about other things as well, so we have forums for those items that don't contribute to credit count.~Viz

Actually, what it looks to me like that piece of code does is say: make the application that handles *.png files (SetHandler) the php compiler (application/x-httpd-php). So all that happens is that png files are automatically sent to the php interpreter. To have a php script return a png file, place this code at the end of it: header("Content-type: image/png");imagepng($image);where $image is the variable holding your image. This sets the return type of the script to a png file and then retunrs the image. You then call the script in a page using an <img src="http://www.blah.com/script.png; tag. If you want to have one script create multiple images, simply make a script that takes a variable from a get and use this kind of image tag: <img src="http://www.blah.com/script.png?image=foo; and have your script create a differenty image depending on the value of foo. I use this technique to create an image that contains random text for a signup validation script. ~Viz

First fo all, that's not a DC to AC adapter. Laptops (like all computers) take DC power. Most Desktops have a built in power supply to convert AC power to DC, which is why you plug them directly into the wall. Laptops have the box on the power cord to perform the conversion. Second of all, check with the maker of your laptop for a car adapter, as many make them. Otherwise, check the box on the main cord and it will say "OUTPUT: 19V 4.74A" (or similar numbers) this is the voltage and amperage that your computer runs on. You should be able to find an adapter in a store like CompUSA using those numbers. And a sales associate will also be able to help. But check with your laptop's manufacturer first.~Viz

Try ebay, for example, I did a search and came up with this. Moreinfo on the specifics of your adapter would help me in my search. ~Viz

THe Xisto server was recently changed, and we are still experiencing initialization and sakedown bugs, as a result, certain things (like the shoutbox and the credit list) may go down or be down for a little while, so patience. I personally have a feeling everything will be back to normal in a day or two, but if something goes horribly wrong that could change.~Viz

How deeply negative were you? If you went below -30 then your old account is gone, I'm afraid to say. You must reapply, and all files have been deleted. If you never dropped to -30 or below, your site should reenble itself shortly.~Viz

As I just started my endeavor into Linux, I currently use Fedora Core 4. I hope to eventually switch to simply a kernel where I add all the packages I want, but I fear that is ways away. The main reason I run Linux at all is so I can test assembly programs in Linux for my soon to be forthcoming assembly tutorials (no later than next week).~Viz

I feel this is important to point out: we staff also cannot and will not tolerate any disrespect to any of the Xisto members. It is wrong to disrespect anyone on this forum, and a violation of the TOS, but it is dumb to do it to a moderator or Administrator. ~Viz

Okay, that would explain why I never saw how to do it, thanks OpaQue.~Viz

Two words: System specs. without information on your system, sound card, driver, and media player version, we cannot help you, just offer random guesses.~Viz