bluedragon

All are fakes .. books can't be EXE by the wayMods please remove these links these could be potential malwares\virusesThanks

Just refer to you mannual regarding the same , you say that it creates a LAN like connection when you connect it with a USB , that is you mean the connected icon in the task bar in the system tray ?
If so that is common when you connect any external devices , for instance if you connect a normal mobile phone with the PC using bluetooth then too you can see that icon over there in the task bar ( system tray ) So all it means is it is connected.Sharing data between the two is possible thats it.

Are you working in a call center for technical support
Manual

just kidding.. Anyways

I get a LAN icon whenever I connect my PDA and I even option to configure it just like any other LAN connection. There is just one difference, whenever I remove the device, its gone. Even from the "Network Connections" window


Well normally when a Mobile connects to a PC, It either enables a storage card accessibility or it gives you control over the Modem built on it.

There are other modes also depending on the manufacturer but these are the two main important ones that are there in most of the mobile

Now If I want to access internet using my mobile , I can easily dial a number and access it.

With PDAs the case it different , They connect using LAN.

as soon as I connect My ActiveSync fires up and starts synchronizing.


I just want to know how can I access the internet using a LAN like architecture from my PDA and route to DSL on my computer

settings/configurations/ some software please.

Thanks

I once worked on 3d Max 4 and it was too complex. Took help from a book. Try your local Library/Market for a book on 3Ds Max 7. That will help.

You can buy tutorials off the internet but I won't advise that. I tried few tutorials for FLEX and it didn't help. Its better to read a book than look in online tutorials.

And we can't provide torrent and RS links on this board

P.S. If you are really interested in 3D modelling try using Blender
https://www.blender.org/

They have a lot of tutorials online and plus its free

I don't think is a good idea to open the laptop yourself, it's better to call technical support and see if they can fix that, if the solution is too expensive or if they tell you there's no way they can fix that then open the computer yourself and try to fix it since you have nothing to lose, in the meantime you could use a external monitor to plug in your computer and at least be able to work with it...

I agree and this will also test and clear if your graphics card is working or not ... Try connecting an LCD/TFT /CRT Monitor

btw.. I think your graphic card is working and its just the screen connectors , since if otherwise, Most of the Motherboards have an on-board graphics card and when they get burned they don't turn on and start beeping to indicate it.

Well there is problem in your Graphics card it is not compatible to the game which you are playing so need to either change it or make to it compatible by small change in configuration file of graphics card embeded software. there may be requirement to change there hardware configuration of card to make compatible with full support of any garphics software. first please read the instruction of readme file of configuration.ini or may different name. and make change according to instruction to install full support graphics accelerator.
please this is only guide/way to solve the problem, but you go according to your way which is suitable to you.

thanks

Hi Mods , This guy doesn't even know how to spam please teach him how to write All I could understand was that he's trying to explain me how to modify hardware configuration using some software .. I Don't think thats possible



Thanks all

I think the problem is with the driver itself. Coz when I reboot twice or thrice , It works properly.

Anyways, I am not going to go back to the old version of drivers. I have the latest version installed and they came with the PhysX software for the hardware on my graphics card. Its producing some very good results for games like GRAW and COD4. I think I'll stick to it and may be try and reinstall it.



Moderators please close the topic.
Thanks

Hi Recently my PC has started behaving abnormally Although everything seems fine and its not even slow as such but when I try playing games , it is showing games at 200% speed I mean I am not used to it And for that reason its not even normal I mean if I am playing NFS the car moves like crazy and I can't even see turns If I try playing counter strike, The Enemy just shoots and goes past , I dont even see it It has started happening only couple of days back.. What could be wrong ? Please suggest My specs are as follows Intel Core 2 Quad Q6600 RAM 2 GB Graphics Card - XFX 8600 GT 512 MB Motherboard - Asus P5Q I can't figure out whats going inside .. any help would be appreciated.

A system can become unstable and crash for many reasons. Its not always a hardware faultThe BCCode that you wrote means that your System rebooted because the system could not handle the exception that had occured.Now I am not good at Windows Programming. But may be someone good with it can tell you more as to where the problem is exactly. Its Done by Analyzing the other arguments, BCP1, BCP2 etc. But then I think it could be either of the two possibilities only either one or more of your hardware could be incompatible with Windows XPor You have an improper version of Windows XP :PI'll suggest you reinstall windows from an ORIGINAL disk btw.. what version of windows were you running before this, because from the error code I think its sp3 you are running nowSP3 has some incompatibility issues with certain device drivers.

@Echo_of_ThunderTry and use "Hijack This" software. I think its just a trojan. If you can identify and remove all of the entries of this malware/trojan. Your system will be clean.btw .. You can always check for a file's authenticity by right clicking and checking for properties. Most of the files that are fake don't have a manufacturer's signature. You can delete these files by booting in safe mode or command prompt. But since you are using vista you won't be able to boot in Command prompt

@Forte - Grease Monkey runs scriptsDoes it run with only "Grease Monkey" disguise or are there any other forms also ?I am seriously at threat .. My main browser is Firefox 3 and All my passwords are stored in this only.. I don't even remember most of the pwds :PGuess I'll have to switch to Opera. . Is there a software to retrieve passwords from Firefox ..

@ odomike - Linux is SECURE Dont worryIf you have Ubuntu then You can also use something better for making partitionUbuntu has a great Disk partition manager. I've tried it myself and its better than any windows version of the utility. It formatted my 250 GB in less time than what windows take. It has a good enough graphical utility that can display partition sizes and most importantly it allows you to undo any/all of the decisions before applying anyI haven't used Norton Partition magic, I've used Avanquest partition magic. I think its the same thing only the company has changed :PBut then I never liked it. Even though they claim that their is 0% data loss, I've had some bad luck with it.NEways best of luck.I'll suggest you install Windows after you install Linux. That ways the boot-loader will be of windows and not GRUB or LILO.I dont know how to edit them.If you install Windows before your Linux. Then When You try to remove it, You'll run into problemsanyways.. best of luck

Generally a large 10k or 15k drive is more susceptible to failure than a same size 7200 rpm drive , that is why major gaming systems come with 7200 rpm.I believe its bcoz they tend to generate higher temperatures and since when you are gaming it requires lot of read and write (swap, levels etc) and if someone is a hardcore gamer or is trying to be one, he might end up 15-16 hrs a day and that is ought to bring down the hard-diskHence generally 7200 rpm drives are used. 15k rpm is generally required for faster boot times as explained by rvalkass and truefusion :PYou wont experience any difference in the gameplay, except only faster loading times. To be honest , you can even neglect that it takes less than 30 sec to load level for crysis warhead on my system (7200 rpm seagate) and one more thing 15k drives are NEVER used to keep data backups only 5400 rpm drives are used for that. Don't know the reason but have seen it in many of the companies :Pmay be its the cost factor but I doubt since they are using Workstations , so definitely they can afford 15k drives

x58 can run either SLI or Crossfire but you won't be able to run both the technologies simultaneouslyas far as I know the two architectures are slightly different, while x58 supports SLi by default, the chip supporting Crossfire is also there so it supports that alsoI am slightly confused, but sure that both the configuration simultaneously wont be possible

Can you be a little more clear , you want your PC to act as a node and your PDA to act as another NODE ?? so that you wanna browse on your PDA ?? Your aiming at making your PC a Server and the PDA connected to it a Client ??

I want either PC/ PDA as a server and the other thing as client. I need both the configurations

I think it is possible .. But I am not able to set it up. Could someone help me ? pls

There is no way to burn fat off "specific body sites" with exercise. The only way to do that is with liposuction which basically sucks the fat out of that specific area.Doing crunches and situps wont burn the fat off your stomach, it will simply make your stomach muscles more toned, but most of the fat will remain.
The only way to burn fat off anywhere in your body is by doing Cardio workouts (walking to start off with, running or swimming are probably the best)

Of course there's also the diet factor, perhaps smaller meal portions, less junk food and snacks, cut down on the fats, more veggies and fruits.

Easy enough for me to say but quite difficult to maintain.
Good luck!

Hey Y4nzi .. Nice pic you got there as avatar .. []

when i replaced my card i also replaced the compound between processor and heatsink on my cpu, it was used when i bought it, although i never noticed an overheating problem... but i may put it back in if i could run both cards, has anyone done this i would then have two vga ports, 1 dvi port, 1 composite, and two svideo ports i have a k9a2platinum board so i have 4 pci-e slots

I am sorry but I didn't understand this properly but still i'll give it a try ..

 

Either you want to put back the thermal compound back on your processor or you want two graphics card in Crossfire configuration ( since thats what your motherboard supports)

 

1. If its the thermal compound problem - you should remove the fan on your processor, and put the thermal compound properly on your processor and then replace the fan. but I believe you've done this already

 

2. If you want the crossfire configuration - there are two things you need

(1). Two graphics card (ATI)

Crossfire Edtion as Master

Crossfire Ready as Slave

 

You cannot use ATI and NVIDIA cards together. Either TWO Crossfire type ATI cards or a SINGLE NVIDIA card

(2). Crossfire connector - this joins the two cards

 

I haven't configured it myself but you must have got a manual with your motherboard that will tell you how to enable it

P.S. although your motherboard has 4 PCI-Ex slots but you will be able to use only 2 at a time. I am not really sure though. If you get all four working pls do write how you did it

 

Also Your motherboard does not support SLI meaning you won't be able to put up two NVIDIA cards

For Windows Vista, you could try running it in compatibility mode, setting it on Windows XP. As for Windows XP, have you checked if there are any patches out for this game? I would suggest you look for that first and also try updating your soundcard drivers.

I want the game running in XP. I am not much concerned about it loosing the saves since I am quite used to saving often.

XP:
I've downloaded the latest version of XP drivers off ASUS.com . I initially thought of getting it from Realtek's website but I couldn't find my audio hardware in the listing. Its ALC 1200 and for some reason I couldn't find it.

There was a patch for this game and it was installed automatically by the updater. I even downloaded it again and manually installed it (twice)

I don't think "Downloading movies" from "Demonoid" is legit :)Anyways, It differs from country to country so I can't comment much.You can try some other sites where they don't require authentication/registration.

Installing Geforce 9600 GT

 

Nvidia Display Driver Problem

 

 

 

I can't install my card. When I run the setup it says my Vista is not a 32-bit system. It is in fact. Any ideas?

What make is your card ?

 

I would suggest you download the new drivers from manufacturer's site or try downloading the drivers from Nvidia.com

 

It could be due to the corrupt driver setup

I prefer NVIDA, i have used a few ATI cards, and a few NVIDA cards, as well as some other less popular ones...

NVIDA has always been faster and more up to date with the latest technology in my opinion!

Alsthough ATI does have its advantages, like Crossfire....

Nvidia has SLI and I don't remember where but I saw they can put up 3-4 cards in SLI ..

I just bought a PDA (HTC P3300) .. I noticed that when I connect it to my computer (using the USB cable that came in box), It creates a LAN like connection and the Active Sync synchronizes itself. Now my question is , Can I use my Internet Explorer in My PDA to work with the LAN connection on my PC ?and How can I configure it ?Also .. Is it possible to use the Internet Explorer on my PC to use the PDA connection for internet Just want to try stuff thats all. I have EDGE enabled on my mobile so its not a speed issue, basically my DSL connection is unlimited and I have a Limited plan on my Phone

truefusion is right .. You can't/shouldn't convert a low quality MP3s.. One more thing though.. You won't get a WAV of same quality with the same size as MP3. Thats why ppl convert Wav to MP3 and not MP3 to WAV :)Another thing to keep in mind while performing the conversion would be the bitrate - whether it is variable or fixed. If its a VBR quality MP3 and you uncompress it , You might get a huge WAV :)Anyways, Audacity is the only program I know of.. I had another one called Cheetah audio converter but I don't think its available now.. If you want to convert from WAV to MP3, LAME is the best :DAnd if you are ready to buy something, Go for Sony Sound Forge

Hi, I am having strange issues with this game .. I first thought of posting this in the games section but I think the problem is a software or may be driver related so I am posting here I bought this one recently, Splinter Cell : Double Agent. This was a second installation on my machine .. The first installation was not legit so I had removed it. This issue was there with the first installation also So I thought may be buying an original DVD would help , But I guess I was wrong :)Now the problem is that everytime I try running this game on my XP there is no sound in any part of the game except for the movies part but the game works fine. And when I try running the game in Vista, It works perfectly with all the sound effects. Also, Initially during the installation part, It did show up some compatibility issue with the driver version of my graphics card but I cant help it since those are the newest possible available on the site. Oh. and there is just one issue with Vista which I think is because the game was not initially designed for Vista , It doesn't do Autosave.Now I just want it properly running in Windows XP. Can anyone suggest what I should Do with this ? I tried reinstalling , but It didn't help.My Specs are as follows: Intel Core 2 Quad @ 2.4 GHz 2 GB ram 8600 GT 512 MB graphics card Realtek HD audio (onboard Asus P5Q motherboard)Thanks

Its not true for all Ati based cards.. Its basically due to the difference in architectures of the two cards and also the Two focus on different issues in Graphic rendering. If you are using an ATI card you will be getting a better more clearer Image quality than its Nvidia counterpart. ATI focuses on quality while Nvidia gives you performance card while compromising on Quality. You won't feel the difference in Low end cards but If you go for higher end cards the difference is quite noticeable. :)Even I had some issues with ATI cards few years back .. I had an ATI 9250 .. It used to freeze whenever i tried running NFS Underground 2 but then not all ATI cards are bad. My friend has been using a 9800 pro and it works great till now :DAlthough He has bought another card but He still has the his previous card.

rvalkass is right.. I presume you have only USB 1.1 Ports on your motherboard. If you need 2.0 speed I guess you'll have to buy a PCI based USB card that can actually give you USB 2.0 ports, otherwise there's no point using a HUB.. :)Speed of USB is based on the Controllers and it cant be increased by adding a hub. You may however add extra PCI cards that give you 2.0 compliant USB ports, or another option is to wait and buy a better motherboard (that is if you are thinking of an upgrade). The extra card is not advisable in many cases since it doesn't give you a true 2.0. Its basically an option for motherboards that doesn't have any USB ports on board. Many a times there are cheap cards that are not even compliant with XP/Vista standards. The wire won't make any difference. Since its telling you already that the device needs a high speed connection, hence it is a USB 2.0 compliant wire. Although I haven't seen any USB 1.0/1.1 compliant wires myself.

My dell is crazy

 

Dell Computer Problems Need Help.

I have a dell insprinon 1500 and it has gone crazy. First the fan over heated and it stopped I took that apart cleaned it and it worked for a few hours. Then it stopped I just put it to the side for a few days tried it and it worked for all of 2 minutes while dell tech support had me turn it off again. Now it won't stay on for longer than 3 seconds without shutting off..It only shows a black screen and then powers off as soon as it powered on. I can take out the memory cards and it will come on make 3 beeping sounds and stay on but if the cards are in it ,it will not stay on. I have spoken to some people and they say it most likely is the mother board and I should just buy a new one. Could this be it or could it be something I can fix. I have taken it apart to check for any loose connections and I have cleaned the fan and all the dust out. I know its not the power source as it comes on and will charge the battery. I just spent 150 dollars to have it cleaned out and it was working fine till the fan overheated. PLease let me know if you can think of anything I can do to make it work I have important documents saved on it I need for work.

Ty

 

-question by locadelocas

First of all you gave 150 dollars for cleaning a FAN ????

 

Anyways.. You can try putting a different RAM module (borrow it from some friend) and then power ON..

 

Its not a heating issue I think , You can try putting the system in front of an Air-conditioner and then power on if you feel so.

 

NEways.. If both of the options doesn't work , You'll have to change your system's motherboard.

 

You can take out the hard-disk and buy a casing to make it external , if your data is that important.. and then may be connect to your new system. It will serve as a backup drive also