Jump to content
xisto Community
Sign in to follow this  
podbicanin

Rambus Speeds Up Its Dram

Recommended Posts

Memory-chip designer Rambus will show off faster versions of its DRAM technology in San Francisco this week at the Intel Developer Forum, a confab for computer-hardware designers, the press and other tech mavens. The new RDRAM flavor is called RIMM4200 and is an update of Rambus' RIMM technology--for Rambus inline memory module. It adds a second memory channel and faster new chips to increase the speed at which data moves from the module to other PC components. The RIMM4200 incorporates two 2.1GB-per-second memory channels to transfer data at a combined rate of up to 4.2GB per second, Rambus said. The current Rambus RIMM, the 1600, uses only one channel and offers rates of 1.6GB per second--though many PCs use dual-channel configurations that pair modules to deliver rates of up to 3.2GB per second. The RIMM4200 module also uses new, speedier RDRAM chips running at 1066MHz. The current Rambus RIMM uses 800MHz RDRAM chips. RIMMs are constructed by combining several chips on a circuit board. The move by Rambus comes at a critical time for RDRAM. Though PC makers and Intel say RDRAM continues to offer the highest performance, efforts by Advanced Micro Devices and a new Intel 845 chipset for the Pentium 4 have helped popularize a rival technology known as Double Data Rate SDRAM. DDR SDRAM, a faster version of standard Synchronous Dynamic RAM, is now available from all but a few PC makers, who generally pitch the technology as a middle-of-the-road offering between RDRAM and SDRAM. As a result, Rambus finds itself in the position of having to convince buyers to upgrade to RDRAM over DDR SDRAM. Rambus' 4200 modules should be available starting in the second quarter of this year and, according to sources, will be part of a coming hardware upgrade for high-end, Pentium 4 desktop PCs, which Intel plans for the early summer. At that time, Intel is expected to incorporate the new flavor of Rambus and bump the speed of its Pentium 4 front-side bus from 400MHz to 533MHz. The bus provides a data pathway from the memory to the processor. Increasing the speed to match the faster memory allows the PC to shuttle data more quickly between memory and the processor, speeding overall performance. Samsung and other DRAM makers will manufacture the new RDRAM chips or RIMMs. Samsung will offer its own demonstration of the new memory at the Intel Developer Forum, the company said. The 4200 modules are part of a Rambus plan, announced last year, to boost RDRAM from its current transfer rate of 1.6GB per second at 800MHz to 9.6GB per second at 1200MHz by 2005. The extra RDRAM performance will be needed, as DDR SDRAM now runs at speeds of up to 333MHz and offers data rates of up to 2.7GB per second. But most PC makers offer the technology at 200MHz and 266MHz, where it offers data rates of 1.6GB and 2.1GB per second, respectively.

Share this post


Link to post
Share on other sites

watch out dude you'll get tagged as a spammer around these parts if you just copy paste stuff from other places. Its not a good habit in general since it can get you into a lot of trouble in college and afterwards. Better always to rewrite stuff yourself or credit your source fully if you do quote them.As for the Rambus thing, they have completely failed once, I don't see why it shouldn't happen again. DDR2 and DDR3 is already being used and the later's bandwidth is just as much as what was mentioned so I don't see anything other than Rambus going bankrupt!

Share this post


Link to post
Share on other sites

Im using RDRAM right now, and its a real pain in the **bottom**. You have to buy it in pairs, which is extremely expensive. I found that its actually cheaper to buy a new motherboard and buy DDR SDRAM than to buy the equivelent in RDRAM. I think a gig of SDRAM is better than half a gig of RDRAM if you're actually using it. If not, go with the faster RAM.

Share this post


Link to post
Share on other sites

Im using RDRAM right now, and its a real pain in the **bottom**. You have to buy it in pairs, which is extremely expensive. I found that its actually cheaper to buy a new motherboard and buy DDR SDRAM than to buy the equivelent in RDRAM. I think a gig of SDRAM is better than half a gig of RDRAM if you're actually using it. If not, go with the faster RAM.


Totally agree. I purchased 2x 512's and they cost 2-3 times what ddr would cost.. The increased speed over ddr memory is nice, but it's by no means a big noticeable difference. I switched to DDR a year back and won't consider switching over to RD again until prices seriously drop!

If you have extra money to burn go for it, but it won't blow your mind.. only your wallet :(

Share this post


Link to post
Share on other sites

Since Intel dropped them for good RAMBUS was not really able to get back on it's feet. I used RAMBUS based system before, though they really run at a higher speed the difference with DDR or DDR2 is negligible on most applications. And then there's the price factor, RAMBUS is expensive and you need the hassle of putting those terminator modules in case you just bought a pair.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.