Jump to content
xisto Community
Sign in to follow this  
minnieadkins

Choosing Router: Critque This One

Recommended Posts

I've heard Linksys makes the best wireless router. I searched on pricewatch and came up with this:
http://imptestrm.com/rg-erdr.php?_dnm=www.zipzoomfly.com&_cfrg=1&_drid=as-drid-2300300503455222

Will someone tell me if this router is capable of what was discussed on this thread: http://forums.xisto.com/topic/88538-topic/?findpost=1064336759

This looks to me like it's one of the better wireless routers on the market. I think it's a G series. Someone please help me out if they know something I don't about this router, or this company that's selling it.

Share this post


Link to post
Share on other sites

that's exactly the same router i'm gonna get sometime hopefully this month if i have the time to go to the store. I think it's a good router. It can be used by both gamer desktops (Wired) and web surfer laptops (Wireless). This is just what I need here at home.

Share this post


Link to post
Share on other sites

Will someone tell me if this router is capable of what was discussed on this thread: http://forums.xisto.com/topic/88538-topic/?findpost=1064336759

 

This router is capable of "routing". That is, you connect PC's to it, either via ethernet cable or wirelessly. It then gives every connected computer an own internal IP address, and every computer can use the internet and connect to every computer in the network to for example share files. This is almost completely without any hassle, which ICS is known to have.

This looks to me like it's one of the better wireless routers on the market. I think it's a G series. Someone please help me out if they know something I don't about this router, or this company that's selling it.

From what I've heard it is a good router, above all very stable. It has also got an interesting thing, a linux based OS that you can modify and install different additions. More information on that here. One thing though. No official support by Linksys if you do that.

Share this post


Link to post
Share on other sites

Linksys works pretty well. I have a Linksys Wireless B router at my house. Never really had a problem with it at all. The router your looking at now will work just fine. 10/100mb and wireless G is all you need for basic home networking needs.Although I'm sure you can find a better price than $59.99 if you really wanted to. Wait a week and check out some sales.

Share this post


Link to post
Share on other sites

I would sugest you get a MMIO router bit the is risk in buying MIMO gear, since there is no such thing as a "MIMO" standard and the 802.11n high speed wireless standard that it is emulating is at least a year away from ratification. Since none of the current MIMO technologies are 802.11n, or can even be considered "pre-802.11n", forget any possibility of an upgrade to 802.11n compatibility when that standard is finally released.


The good news, however, is that Airgo and Atheros-based MIMO products are interoperable with existing 802.11b and g gear, although both will experience a throughput drop when non-MIMO gear is mixed into their wireless LANs. I previously examined mixed WLAN behavior for NETGEAR's RangeMax and a Linksys Airgo-based product in detail. And while I didn't verify the interoperability of any of the Atheros VLocity-based products, since Super-G is an important core VLocity technology, I don't think it's a big leap to assume that those products will handle mixed WLANs similarly to RangeMax.

But I didn't test the RaLink products for mixed WLAN behavior,so can't vouch for what happens. However, I'd expect behavior similar to the other technologies, with the only question being the extent of throughput drop.

Second, if wireless bridging and repeating or ability to attach higher-gain antennas is important, you generally will get neither from MIMO products. The one exception in this round-up is the Airlink101 router, which has its antennas attached via RP-SMA connectors (but no WDS bridging / repeating).

So as far as risk is concerned, my conclusion is that there is no more obsolescence or interoperability risk from buying "MIMO" products than any other WLAN products using non-standard throughput and range-enhancement technologies.

Next, let's consider price. More competition has lead to lower prices, with ZyXEL being the most notable exception among the products reviewed. But now that you know that you can get the same performance and features from the much more reasonably priced TRENDnet pair, perhaps we'll see ZyXEL come down in price.

Tip Tip: Like parent Cisco, Linksys would like you to believe that their name on the box justifies higher prices for products that are essentially copies of Airgo's reference designs. But Belkin's Pre-N and G Plus are also Airgo reference clones and cost up to 30% less.

But most manufacturers are slugging it out and slashing prices with the result being that as I write this you can pick up a "MIMO" router for under $60 (the Airlink101). But given the Airlink101's inability to connect in either of my difficult test locations 4 and 5, you'll probably should expect to spend more like $80 - $90 for one of the better-ranked products.

You should note that finding a deal on MIMO client cards is more difficult, since that's where manufacturers are trying to squeeze out some margin so that they can live to fight another day. As noted previously, I suspect that NETGEAR may be doing the best at this game, given the single chip design of its WPN511 RangeMax client and its comparatively high price.

If high throughput is what matters most to you, then choose any of the products using Atheros VLocity technology, i.e. the D-Link, ZyXEL or TRENDnet gear. Since all three also include routing sections with Ubicom's StreamEngine Internet upstream optimization technology, you can buy again on price, with TRENDnet getting the nod as low-price leader.


But keep in mind that you'll achieve this highest throughput only if your WLAN contains only Super-G clients and more likely only if the clients are from the same manufacturer and product family. You'll also need to make sure your hopefully speed WLAN isn't within range of any neighboring non Super-G wireless networks, since Super G products must shift down out of channel-bonding "turbo" mode if any are detected - even if you force "Static Turbo" mode.

So what about the other products? The Ruckus Wireless products command the highest price and may end up being mainly sourced via IPTV service providers (although the company says you can purchase them directly by emailing them). They don't provide the highest peak throughput, but earn the distinction of having both the highest total up and down throughput and WQS numbers in my most difficult test locations 4 and 5.

The non-MIMO Buffalo Turbo G Hi Power pair actually held its own among the sexier MIMO gear and managed to maintain 2-3Mbps of usable (although not with low variation) in the location 4 and 5 tests. Wireless bridging / repeating, upgradable antennas on both router and client, and pricing below all but the Airlink101 could make it an attractive alternative if you're willing to accept higher throughput variation for a lower price.

And what about the NETGEAR RangeMax, which ranked next-to-last for up and down WQS and behind both the Atheros and Airgo-based products for total up and down throughput? Actually, that about sums it up for this pair that seems to suffer from its earlier-generation Atheros technology and client that doesn't use the multi-element BeamFlex antenna. While it may be a top-selling MIMO product now, its technology and features are getting long in the tooth and the VLocity and TrueMIMO based products provide better value.

This brings me to the Airlink101, which bears the distinction of being the only product that I can't recommend because of its bottom total throughput ranking, low WQS and especially its inability to establish a connection in both difficult test locations 4 and 5.http://www.tomsnetworking.com/

Edited by James_K (see edit history)

Share this post


Link to post
Share on other sites

This is the same router I have and I have to say that at first, my experience with it was a little rough (hey, it's Cisco, not D-Link). I came off of a D-Link router but when I upgraded the firmware on it, it flipped and went nuts and that's when I completely abandoned the D-Link brand.Linksys is amazing. When I upgraded the router's firmware, the bloody thing didn't crash like my D-Link. Customer Support is VERY friendly and helpful and they also have a live chat which I found very useful and helpful for urgent topics or if you don't want to wait for email (which is also pretty fast... faster than D-Link).But I'd definately tell everyone to get a Linksys.[N]F

Share this post


Link to post
Share on other sites

I bought this router. I like it, and everything works fine. The only problem is, don't buy version 5 if you want to add 3rd party firmware. They reduced the ram size or something to 2 mb's. It's not large enough to support the 3rd party firmware. So far it's been pretty good though. It's a decent price, and I got what I expected. Maybe a little more. I appreciate all the advice everyone gave.

Share this post


Link to post
Share on other sites

Quick question on this router. I installed everything fine for windows, but I have a partition on my hard drive for Mandriva (Linux). Just curious if anyone knows if this router is Linux compatible, and if it is, what do I do to go about installing it on linux. Consider this: I am a linux "noobie", so I don't really use it much. I installed this distro to try to learn more about it, and I'm still in the process of learning.

Share this post


Link to post
Share on other sites

Routers are not OS dependent.
they only route the traffic.
If its connecting to the router's interface, then there might be an issue. I dont know this router in particular if it uses a web based, telnet, ssh, or an application to manage it.





Quick question on this router. I installed everything fine for windows, but I have a partition on my hard drive for Mandriva (Linux). Just curious if anyone knows if this router is Linux compatible, and if it is, what do I do to go about installing it on linux.
Consider this: I am a linux "noobie", so I don't really use it much. I installed this distro to try to learn more about it, and I'm still in the process of learning.


Share this post


Link to post
Share on other sites

the thing about the MIMO stuff is that its WAY too expensive. well...even when 802.11n comes out it would be more that this MIMO stuff. im perfectly fine with my D-LINK router with my AirPort Extreme Base Station-perfect combo. AirPort for extending the network cause some computers dont like the airport (because its Apple made.)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.