Sub Domain Help In Xampp Sub Domain Help in xampp

[it01y2 0]

I am trying to work out how to get subdomains working in xampp. I have tried all of the tutorials on the net but I still cant work it out. Any Ideas?Thanks Rob

[jlhaslip 4]

Pm sent with directions. There is also a topic I wrote about setting up XAMPP in the Tutorial section.

A couple of posts down, Tyssen wrote a bit about how to set sub-domains up.

Between the Tutorial and the PM, you should be set. Basically, duplicate the VirtualHost and Directory information in your httpd.conf file and then mod it to match the path for the new sub-domain and then add an entry to the hosts file.

Reply here if you need anything elase, though.

I will try to remember to post a copy of the information later. It is too late here right now. I'm going to bed.

 

OPTION: Post the contents of your C:/Windows/hosts file and the VirtualHost and Directory directives from the httpd.conf file in this thread with the name of the domain you wish to use on the XAMPP of your machine and someone will assist you in creating it???.

[it01y2 0]

Heres my current config file:

 

## This is the main Apache HTTP server configuration file.  It contains the# configuration directives that give the server its instructions.# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.# In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html># for a discussion of each configuration directive.## Do NOT simply read the instructions in here without understanding# what they do.  They're here only as hints or reminders.  If you are unsure# consult the online docs. You have been warned.  ## Configuration and logfile names: If the filenames you specify for many# of the server's control files begin with "/" (or "drive:/" for Win32), the# server will use that explicit path.  If the filenames do *not* begin# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"# with ServerRoot set to "G:/xammp/apache" will be interpreted by the# server as "G:/xammp/apache/logs/foo.log".## NOTE: Where filenames are specified, you must use forward slashes# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").# If a drive letter is omitted, the drive on which Apache.exe is located# will be used by default.  It is recommended that you always supply# an explicit drive letter in absolute paths, however, to avoid# confusion.## ThreadsPerChild: constant number of worker threads in the server process# MaxRequestsPerChild: maximum  number of requests a server process servesThreadsPerChild 250MaxRequestsPerChild  0## ServerRoot: The top of the directory tree under which the server's# configuration, error, and log files are kept.## Do not add a slash at the end of the directory path.  If you point# ServerRoot at a non-local disk, be sure to point the LockFile directive# at a local disk.  If you wish to share the same ServerRoot for multiple# httpd daemons, you will need to change at least LockFile and PidFile.#ServerRoot "G:/xammp/apache"## Listen: Allows you to bind Apache to specific IP addresses and/or# ports, instead of the default. See also the <VirtualHost># directive.## Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)##Listen 12.34.56.78:80Listen 80## Dynamic Shared Object (DSO) Support## To be able to use the functionality of a module which was built as a DSO you# have to place corresponding `LoadModule' lines at this location so the# directives contained in it are actually available _before_ they are used.# Statically compiled modules (those listed by `httpd -l') do not need# to be loaded here.## Example:# LoadModule foo_module modules/mod_foo.so#LoadModule actions_module modules/mod_actions.soLoadModule alias_module modules/mod_alias.soLoadModule asis_module modules/mod_asis.soLoadModule auth_basic_module modules/mod_auth_basic.so#LoadModule auth_digest_module modules/mod_auth_digest.so#LoadModule authn_anon_module modules/mod_authn_anon.so#LoadModule authn_dbm_module modules/mod_authn_dbm.soLoadModule authn_default_module modules/mod_authn_default.soLoadModule authn_file_module modules/mod_authn_file.so#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so#LoadModule authz_dbm_module modules/mod_authz_dbm.soLoadModule authz_default_module modules/mod_authz_default.soLoadModule authz_groupfile_module modules/mod_authz_groupfile.soLoadModule authz_host_module modules/mod_authz_host.soLoadModule authz_user_module modules/mod_authz_user.so#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so#LoadModule bucketeer_module modules/mod_bucketeer.so#LoadModule cache_module modules/mod_cache.so#LoadModule disk_cache_module modules/mod_disk_cache.so#LoadModule file_cache_module modules/mod_file_cache.so#LoadModule mem_cache_module modules/mod_mem_cache.so#LoadModule cern_meta_module modules/mod_cern_meta.so#LoadModule charset_lite_module modules/mod_charset_lite.soLoadModule cgi_module modules/mod_cgi.soLoadModule dav_module modules/mod_dav.soLoadModule dav_fs_module modules/mod_dav_fs.so#LoadModule deflate_module modules/mod_deflate.soLoadModule dir_module modules/mod_dir.so#LoadModule dumpio_module modules/mod_dumpio.soLoadModule env_module modules/mod_env.so#LoadModule expires_module modules/mod_expires.so#LoadModule ext_filter_module modules/mod_ext_filter.so#LoadModule headers_module modules/mod_headers.so#LoadModule ident_module modules/mod_ident.so#LoadModule imagemap_module modules/mod_imagemap.soLoadModule include_module modules/mod_include.soLoadModule info_module modules/mod_info.soLoadModule isapi_module modules/mod_isapi.soLoadModule ldap_module modules/mod_ldap.so#LoadModule logio_module modules/mod_logio.soLoadModule log_config_module modules/mod_log_config.so#LoadModule log_forensic_module modules/mod_log_forensic.soLoadModule mime_module modules/mod_mime.so#LoadModule mime_magic_module modules/mod_mime_magic.soLoadModule negotiation_module modules/mod_negotiation.so#LoadModule proxy_module modules/mod_proxy.so#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so#LoadModule proxy_connect_module modules/mod_proxy_connect.so#LoadModule proxy_http_module modules/mod_proxy_http.so#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so#LoadModule rewrite_module modules/mod_rewrite.soLoadModule setenvif_module modules/mod_setenvif.so#LoadModule speling_module modules/mod_speling.soLoadModule status_module modules/mod_status.so#LoadModule unique_id_module modules/mod_unique_id.so#LoadModule userdir_module modules/mod_userdir.so#LoadModule usertrack_module modules/mod_usertrack.so#LoadModule version_module modules/mod_version.so#LoadModule vhost_alias_module modules/mod_vhost_alias.soLoadModule ssl_module modules/mod_ssl.soLoadModule autoindex_color_module modules/mod_autoindex_color.so#LoadModule mysql_auth_module modules/mod_auth_mysql.so#LoadModule auth_remote_module modules/mod_auth_remote.so#LoadModule sspi_auth_module modules/mod_auth_sspi.so#LoadModule log_sql_module modules/mod_log_sql.so#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so#<IfModule ssl_module>#    LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so#</IfModule>#LoadModule proxy_html_module modules/mod_proxy_html.so#LoadModule xmlns_module modules/mod_xmlns.so#LoadModule proxy_xml_module modules/mod_proxy_xml.so#LoadModule bw_module modules/mod_bw.so# 'Main' server configuration## The directives in this section set up the values used by the 'main'# server, which responds to any requests that aren't handled by a# <VirtualHost> definition.  These values also provide defaults for# any <VirtualHost> containers you may define later in the file.## All of these directives may appear inside <VirtualHost> containers,# in which case these default settings will be overridden for the# virtual host being defined.### ServerAdmin: Your address, where problems with the server should be# e-mailed.  This address appears on some server-generated pages, such# as error documents.  e.g. admin@your-domain.com#ServerAdmin admin@localhost## ServerName gives the name and port that the server uses to identify itself.# This can often be determined automatically, but we recommend you specify# it explicitly to prevent problems during startup.## If your host doesn't have a registered DNS name, enter its IP address here.#ServerName localhost:80## DocumentRoot: The directory out of which you will serve your# documents. By default, all requests are taken from this directory, but# symbolic links and aliases may be used to point to other locations.#DocumentRoot "G:/xammp/htdocs"## Each directory to which Apache has access can be configured with respect# to which services and features are allowed and/or disabled in that# directory (and its subdirectories). ## First, we configure the "default" to be a very restrictive set of # features.  #<Directory />    Options FollowSymLinks    AllowOverride None    Order deny,allow    Deny from all</Directory>## Note that from this point forward you must specifically allow# particular features to be enabled - so if something's not working as# you might expect, make sure that you have specifically enabled it# below.### This should be changed to whatever you set DocumentRoot to.#<Directory "G:/xammp/htdocs">    #    # Possible values for the Options directive are "None", "All",    # or any combination of:    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews    #    # Note that "MultiViews" must be named *explicitly* --- "Options All"    # doesn't give it to you.    #    # The Options directive is both complicated and important.  Please see    # [url="http://forums.xisto.com/no_longer_exists/;    # for more information.    #    Options Indexes FollowSymLinks Includes ExecCGI       #    # AllowOverride controls what directives may be placed in .htaccess files.    # It can be "All", "None", or any combination of the keywords:    #   Options FileInfo AuthConfig Limit    #    AllowOverride All    #    # Controls who can get stuff from this server.    #    Order allow,deny    Allow from all</Directory>## DirectoryIndex: sets the file that Apache will serve if a directory# is requested.#<IfModule dir_module>    DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml</IfModule>## The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. #<FilesMatch "^\.ht">    Order allow,deny    Deny from all</FilesMatch>## ErrorLog: The location of the error log file.# If you do not specify an ErrorLog directive within a <VirtualHost># container, error messages relating to that virtual host will be# logged here.  If you *do* define an error logfile for a <VirtualHost># container, that host's errors will be logged there and not here.#ErrorLog logs/error.log## LogLevel: Control the number of messages logged to the error_log.# Possible values include: debug, info, notice, warn, error, crit,# alert, emerg.#LogLevel warn<IfModule log_config_module>    #    # The following directives define some format nicknames for use with    # a CustomLog directive (see below).    #    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined    LogFormat "%h %l %u %t \"%r\" %>s %b" common    <IfModule logio_module>      # You need to enable mod_logio.c to use %I and %O      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio    </IfModule>    #    # The location and format of the access logfile (Common Logfile Format).    # If you do not define any access logfiles within a <VirtualHost>    # container, they will be logged here.  Contrariwise, if you *do*    # define per-<VirtualHost> access logfiles, transactions will be    # logged therein and *not* in this file.    #    CustomLog logs/access.log common    #    # If you prefer a logfile with access, agent, and referer information    # (Combined Logfile Format) you can use the following directive.    #    #CustomLog logs/access.log combined</IfModule><IfModule alias_module>    #    # Redirect: Allows you to tell clients about documents that used to     # exist in your server's namespace, but do not anymore. The client     # will make a new request for the document at its new location.    # Example:    # Redirect permanent /foo [url="http://forums.xisto.com/no_longer_exists/;    #    # Alias: Maps web paths into filesystem paths and is used to    # access content that does not live under the DocumentRoot.    # Example:    # Alias /webpath /full/filesystem/path    #    # If you include a trailing / on /webpath then the server will    # require it to be present in the URL.  You will also likely    # need to provide a <Directory> section to allow access to    # the filesystem path.    #    # ScriptAlias: This controls which directories contain server scripts.     # ScriptAliases are essentially the same as Aliases, except that    # documents in the target directory are treated as applications and    # run by the server when requested rather than as documents sent to the    # client.  The same rules about trailing "/" apply to ScriptAlias    # directives as to Alias.    #    ScriptAlias /cgi-bin/ "G:/xammp/cgi-bin/"</IfModule>## "G:/xammp/cgi-bin" should be changed to whatever your ScriptAliased# CGI directory exists, if you have that configured.#<Directory "G:/xammp/cgi-bin">    AllowOverride None    Options None    Order allow,deny    Allow from all</Directory># # Apache parses all CGI scripts for the shebang line by default.# This comment line, the first line of the script, consists of the symbols# pound (#) and exclamation (!) followed by the path of the program that # can execute this specific script.  For a perl script, with perl.exe in# the C:\Program Files\Perl directory, the shebang line should be:   #!c:/program files/perl/perl# Note you _must_not_ indent the actual shebang line, and it must be the# first line of the file.  Of course, CGI processing must be enabled by # the appropriate ScriptAlias or Options ExecCGI directives for the files # or directory in question.## However, Apache on Windows allows either the Unix behavior above, or can# use the Registry to match files by extention.  The command to execute # a file of this type is retrieved from the registry by the same method as # the Windows Explorer would use to handle double-clicking on a file.# These script actions can be configured from the Windows Explorer View menu, # 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit# button allows you to modify the Actions, of which Apache 1.3 attempts to# perform the 'Open' Action, and failing that it will try the shebang line.# This behavior is subject to change in Apache release 2.0.## Each mechanism has it's own specific security weaknesses, from the means# to run a program you didn't intend the website owner to invoke, and the# best method is a matter of great debate.## To enable the this Windows specific behavior (and therefore -disable- the# equivilant Unix behavior), uncomment the following directive:##ScriptInterpreterSource registry## The directive above can be placed in individual <Directory> blocks or the# .htaccess file, with either the 'registry' (Windows behavior) or 'script' # (Unix behavior) option, and will override this server default option.### DefaultType: the default MIME type the server will use for a document# if it cannot otherwise determine one, such as from filename extensions.# If your server contains mostly text or HTML documents, "text/plain" is# a good value.  If most of your content is binary, such as applications# or images, you may want to use "application/octet-stream" instead to# keep browsers from trying to display binary files as though they are# text.#DefaultType text/plain<IfModule mime_module>    #    # TypesConfig points to the file containing the list of mappings from    # filename extension to MIME-type.    #    TypesConfig conf/mime.types    #    # AddType allows you to add to or override the MIME configuration    # file specified in TypesConfig for specific file types.    #    #AddType application/x-gzip .tgz    #    # AddEncoding allows you to have certain browsers uncompress    # information on the fly. Note: Not all browsers support this.    #    #AddEncoding x-compress .Z    #AddEncoding x-gzip .gz .tgz    #    # If the AddEncoding directives above are commented-out, then you    # probably should define those extensions to indicate media types:    #    AddType application/x-compress .Z    AddType application/x-gzip .gz .tgz    #    # AddHandler allows you to map certain file extensions to "handlers":    # actions unrelated to filetype. These can be either built into the server    # or added with the Action directive (see below)    #    # To use CGI scripts outside of ScriptAliased directories:    # (You will also need to add "ExecCGI" to the "Options" directive.)    #    AddHandler cgi-script .cgi    # For files that include their own HTTP headers:    #AddHandler send-as-is asis    # For server-parsed imagemap files:    #AddHandler imap-file map    # For type maps (negotiated resources):    #AddHandler type-map var    #    # Filters allow you to process content before it is sent to the client.    #    # To parse .shtml files for server-side includes (SSI):    # (You will also need to add "Includes" to the "Options" directive.)    #   AddType text/html .shtml   AddOutputFilter INCLUDES .shtml</IfModule>## The mod_mime_magic module allows the server to use various hints from the# contents of the file itself to determine its type.  The MIMEMagicFile# directive tells the module where the hint definitions are located.##MIMEMagicFile conf/magic## Customizable error responses come in three flavors:# 1) plain text 2) local redirects 3) external redirects## Some examples:#ErrorDocument 500 "The server made a boo boo."#ErrorDocument 404 /missing.html#ErrorDocument 404 "/cgi-bin/missing_handler.pl"#ErrorDocument 402 [url="http://forums.xisto.com/no_longer_exists/;### EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver# files.  This usually improves server performance, but must# be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise# broken on your system.#EnableMMAP offEnableSendfile off# Supplemental configuration## The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary.# XAMPP specific settingsInclude conf/extra/httpd-xampp.conf# Server-pool management (MPM specific)# Include conf/extra/httpd-mpm.conf# Multi-language error messagesInclude conf/extra/httpd-multilang-errordoc.conf# Fancy directory listingsInclude conf/extra/httpd-autoindex.conf# Language settingsInclude conf/extra/httpd-languages.conf# User home directoriesInclude conf/extra/httpd-userdir.conf# Real-time info on requests and configurationInclude conf/extra/httpd-info.conf# Virtual hostsInclude conf/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server ManualInclude conf/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)Include conf/extra/httpd-dav.conf# Various default settingsInclude conf/extra/httpd-default.conf# Secure (SSL/TLS) connectionsInclude conf/extra/httpd-ssl.conf## Note: The following must must be present to support#       starting without SSL on platforms with no /dev/random equivalent#       but a statically compiled-in mod_ssl.#<IfModule ssl_module>SSLRandomSeed startup builtinSSLRandomSeed connect builtin</IfModule>

Notice from jlhaslip:

Added codebox tags

[jlhaslip 4]

Nah, didn't work. Too long.

Only post the Virtualhost and Directory info from the very bottom of the file.

[it01y2 0]

I have tried posting the virtual tag and the directory tag with the information but It wont work. And I have read your tutorial but it still wont work