Jump to content
xisto Community
Ahsaniqbalkmc

How To Make A Win 98 Boot Disk On A Usb

Recommended Posts

I want to make a boot disk on a USB flash drive so that I can access my hard disk through ms dos. I searched on the internet a little bit and found some zip files and with text like extract it to the usb and you are done. Most of them were suspicious and my antivirus software was beeping all the time. So is there any way I can make such a USB disk.The main purpose of making such disk is to for example install microsoft windows xp from a setup copied on my hard disk drive other than C: from dos mode. From my research on the internet I concluded that such installation is possible. so if you have any solution for making such a bootable USB disk then please share with me.

Share this post


Link to post
Share on other sites

You can only boot from USB if your motherboard allows it. You need to check your computer manufacturers website or check the manual that comes with your computer if it can boot from usb. The question on how to make the usb use windows 98 boot sector is out of my knowledge. I never tried it but msdos 6.22 can be installed on USB and windows XP boot USB is the common boot USB version being used.

Share this post


Link to post
Share on other sites

You can only boot from USB if your motherboard allows it. You need to check your computer manufacturers website or check the manual that comes with your computer if it can boot from usb. The question on how to make the usb use windows 98 boot sector is out of my knowledge. I never tried it but msdos 6.22 can be installed on USB and windows XP boot USB is the common boot USB version being used.

Vhortex brother can you please tell me where can I find the files necessary to make such a USB. I have checked my mother board and it supports USB boot. Please give me the link to the files which I need to download for the purpose.Thank you

Share this post


Link to post
Share on other sites

Mostly you can get them from Bootdisk websites. From multi boot service, some windows XP versions allows you to make a bootable USB by going to the control panel and look for "Boot Media", this is a non-standard user function and absent on most end user commercial versions.You can also search on linux forums, from Bart CD websites and other related sites. I can do some initial search and reply with links as soon as I have time to scan and check the files.

Share this post


Link to post
Share on other sites

The general way is to prepare the usb-stick so it becomes a boot device.
The second step is to store the dos file on the usb-stick.

http://forums.xisto.com/no_longer_exists/

http://www.intowindows.com/bootable-usb/

http://forums.xisto.com/no_longer_exists/

http://forums.xisto.com/no_longer_exists/

https://www.engadget.com/

Edited by zenia (see edit history)

Share this post


Link to post
Share on other sites

And also consider this one, the syslinux method : http://www.911cd.net/forums/index.php?showtopic=18846

Guide for Multi-booting from a USB Drive

It's a general tutorial making far more than what you wanted, you can simply stop to this step :

Device - your USB DriveFile System - FAT
Create DOS Startup Disk - check box.
Using DOS System Files Located at: - browse to your floppy disk

Of course, for the "bootable floppy" step you need to have a bootable floppy in your reader, or to have a virtualflop on a bootable floppy image.

Share this post


Link to post
Share on other sites

The general way is to prepare the usb-stick so it becomes a boot device.

The second step is to store the dos file on the usb-stick.

 

http://forums.xisto.com/no_longer_exists/

 

http://www.intowindows.com/bootable-usb/

 

http://forums.xisto.com/no_longer_exists/

 

http://forums.xisto.com/no_longer_exists/

 

https://www.engadget.com/

A fast look is made to the websites that open when the links are clicked upon.

At a first look the websites seem to offer usefull information.

Share this post


Link to post
Share on other sites

I want to make a boot disk on a USB flash drive so that I can access my hard disk through ms dos. I searched on the internet a little bit and found some zip files and with text like extract it to the usb and you are done. Most of them were suspicious and my antivirus software was beeping all the time. So is there any way I can make such a USB disk.The main purpose of making such disk is to for example install microsoft windows xp from a setup copied on my hard disk drive other than C: from dos mode. From my research on the internet I concluded that such installation is possible. so if you have any solution for making such a bootable USB disk then please share with me.

It seems that it is not possible to download a zip file in order to make a bootable usb stick. The stick needs to be prepared to make it a bootable usb stick. And the installation program of Windows XP needs to be uploaded on the usb stick. So there is probably no direct need to upload zip files that make the antivirus program beep.


With posts about information about things found on the internet most of the time it is handy to post the links to the websites where the information and the files to download were found. A link makes it possible for the helpfull fellow member of the forum to have a look at the suspicious website. After having a look at the suspicious website it is much more possible to give some founded advice about the situation.

It might be possible that the sites were telling that they were offering Windows 98 files while in reality the files are virusses, trojan horses and such programs. There are a lot of websites that offer operating programs. There are a lot of websites that offer virusses, key loggers, trojan horses, spy software and other bad files. The size of the file can give an indication about the content of the file. A virus has probably a much smaller content compared to an operating program.

The links in the posts are about Windows operating programs like Windows XP and Windows Vista and Windows 7. The specific question for a Windows 98 usb boot stick was overlooked.
Edited by zenia (see edit history)

Share this post


Link to post
Share on other sites

With posts about information about things found on the internet most of the time it is handy to post the links to the websites where the information and the files to download were found. A link makes it possible for the helpfull fellow member of the forum to have a look at the suspicious website. After having a look at the suspicious website it is much more possible to give some founded advice about the situation.

The link I gave is a full step-by-step explaining how to make a windows98 boot on a USB flashdisk (and more things).I gave this link because I tested the steps and they worked on my system. All the steps are explained, and of course these steps are (not only) copying something on the USB flashdisk.
Concerning the things on the internet, a lot of sites ask you first to download a zip file. Then you have to unzip the file, and find inside some tools which make your flashdisk bootable. Usually they are based on isolinux.

Share this post


Link to post
Share on other sites

Is there anything out there that can make an SDHC or microSDHC in a memory to usb adapter bootable? I was curious. I can then always have spare device at my disposal and always on hand like, in my cell phone in case of emergency. Also on the subject as their been any effort to make a USB bootdisk with the possiblility of password encryption in the boot process or on the opening of files. So there would be no need of company data or personal data becoming public. So in the event something comes lost there is no need to worry about intellectual property getting in the wrong hands.

Share this post


Link to post
Share on other sites

And also consider this one, the syslinux method : http://www.911cd.net/forums/index.php?showtopic=18846
It's a general tutorial making far more than what you wanted, you can simply stop to this step :

Of course, for the "bootable floppy" step you need to have a bootable floppy in your reader, or to have a virtualflop on a bootable floppy image.

The tutorial in the link dates from November 9, 2006.
This tutorial is 10 years old.

Reaching the hard disk using DOS is possible with a boot floppy made by a Windows 98 computer too.

The first link of the website of the link leads to a website that states:

Sorry, we can't find that page.

This means the tool to format the usb stick is not available.

The first link is supposed to link to a website that offers the HP USB Disk Storage Format Tool.

The second link works.

The third link goes to a webpage that offers Microsoft Windows Server 2003 Service Pack 1 (32 bit). It is a bit unclear what the use of this Service Pack is for an usb stick which should contain Windows 98.
Edited by zenia (see edit history)

Share this post


Link to post
Share on other sites

The link I gave is a full step-by-step explaining how to make a windows98 boot on a USB flashdisk (and more things).I gave this link because I tested the steps and they worked on my system. All the steps are explained, and of course these steps are (not only) copying something on the USB flashdisk.
Concerning the things on the internet, a lot of sites ask you first to download a zip file. Then you have to unzip the file, and find inside some tools which make your flashdisk bootable. Usually they are based on isolinux.

The comment that it is very usefull to post links to the information found on the internet is about the start post. When things are told about information found on the internet it is handy for other people to be able to have a look at the information themselves so they can have a better understanding of the information and the implications the information on a website has. Sometimes the visit of a website makes things more clear compared to judge only by the information and the description of the information written in a post.

Share this post


Link to post
Share on other sites

Is there anything out there that can make an SDHC or microSDHC in a memory to usb adapter bootable? I was curious. I can then always have spare device at my disposal and always on hand like, in my cell phone in case of emergency. Also on the subject as their been any effort to make a USB bootdisk with the possiblility of password encryption in the boot process or on the opening of files. So there would be no need of company data or personal data becoming public. So in the event something comes lost there is no need to worry about intellectual property getting in the wrong hands.

The same (4 to 10-years old :) ) link step-by-step will work for the SDHC disk, or you can even make your cell-phone have a bootable ms-dos or Linux! Depends of the hardware of your cellphone, of course,

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.