Jump to content
xisto Community
Sign in to follow this  
benfromsac

Photographing Fireworks Tutorial for shooting fireworks

Recommended Posts

Photographing fireworks presents some technical challenges, it needs quite a different approach to most other subjects but follow these few steps carefully and you will be successful. What are we photographing? Basically we are photographing streaks of light that develop over a period of time against a black background. The great thing about a black background is that it makes no impression on the film, or sensor in the case of a digital camera. So we can leave the shutter open as long as we like, the black will still be black.So, in short, the way to photography fireworks is to set the camera to manual exposure, set the aperture to a suitablef-stop and the shutter to b or bulb. Open the shutter just before the firework bursts and close it after it's finished. Easy!TripodThe first thing we need is a sturdy tripod. Here we are talking about seriously long shutter times of several seconds so nothing but a good sturdy tripod will do. The second piece of kit that would be very useful is a remote shutter release so you don't have to touch the camera at all. In the old days this was a cheap piece of kit called a cable release but nowadays it is more likely to be an electronic gizmo with a higher price tag. I, personally, don't use one but that's because I'm a cheapskate.FocusI'm afraid all the modes and settings that you paid all that money for are all useless when photographing fireworks and auto focus is one of them. If you leave your camera set to auto focus the lens will whirr backwards and forwards in a demented fashion trying to find something to focus on in the black sky.Set the focus to manual and then focus on something in the far distance. Don't just wind the focus ring around to the end of its run, check it against a distant object if you can.Aperture & Shutter Speed - The Technical StuffThe exposure is going to be determined by the intensity of light from the firework which, as it bursts will spread across the sky. So we can only be guided by people who have been successful in the past as there is not way to measure the light at the time. There is TTL metering which can measure the light during an exposure, as it does with a flash exposure but, in the case of fireworks, there is far too much contrast to give a useful reading.The aperture you set depends on the ISO rating (basically the sensitivity to light) for the film or the ISO rating set on your digital camera. At ISO 100 you will need to set the aperture to between f8 and f16. So a good start would be f11 at 100 ISO but be prepared to vary this a little for very bright fireworks. As I mentioned above, the shutter speed needs to be set to b or bulb (bulb refers to the old fashioned type of remote shutter release, on which you literally squeezed and rubber bulb and triggered the shutter with a burst of compressed air). At this setting there is no set time for the exposure, when you press the button the shutter opens and when you release it the shutter closes. So the shutter may be open for several seconds. There is no significant build up of light on the film or sensor as the sky is black and the firework is only lit for a short time at any one spot before it spreads out.FramingFraming a picture you can't yet see is always going to be a challenge. What are you going to aim for? I think there are basically three shots to consider, there is a wide shot that includes a bit of foreground - a building or monument, especially if they are floodlit, or just silhouettes of the crowd. This can be really great when it all comes together but there are quite a few problems. Will the fireworks go off in the right place in the frame? Will everything be properly exposed? Will any movement on the ground be too blurred?Another way to work is to shoot all the elements separately then combine them in Photoshop. Shoot the whole scene without any fireworks then shoot the fireworks separately and drop them into your main picture in exactly the position you want them. Because the sky is black this is really easy to do. If you're planning to do this it's important to make sure you get the whole firework in the frame.Most importantly, have fun and experiment with your own ideas and techniques! Remember, when photographing, be as creative as you can, there are no rules when it comes to creativity. :)

Notice from BuffaloHELP:
Copied from another source. Please give a proper credit when pasting. Review our forum rules regarding usage of proper bbcodes.

Share this post


Link to post
Share on other sites

Similar techniques can be used for photographing lightning. When I first started out in photography, I had no idea how they could manage to capture lightning on camera until my teacher told me that they leave the shutter open until the lightning strikes, which acts as a natural flash and is exposed onto the film. Well duh haha, I hadn't thought of it that way. The biggest problem with capturing lightning is finding a safe place to set to see the stuff without exposing yourself to possible electrocution.

Share this post


Link to post
Share on other sites

Can you explain how to do all this in more detail ill paste it in here Photographing fireworks presents some technical challenges, it needs quite a different approach to most other subjects but follow these few steps carefully and you will be successful. What are we photographing? Basically we are photographing streaks of light that develop over a period of time against a black background. The great thing about a black background is that it makes no impression on the film, or sensor in the case of a digital camera. So we can leave the shutter open as long as we like, the black will still be black.So, in short, the way to photography fireworks is to set the camera to manual exposure, set the aperture to a suitablef-stop and the shutter to b or bulb. Open the shutter just before the firework bursts and close it after it's finished. Easy!TripodThe first thing we need is a sturdy tripod. Here we are talking about seriously long shutter times of several seconds so nothing but a good sturdy tripod will do. The second piece of kit that would be very useful is a remote shutter release so you don't have to touch the camera at all. In the old days this was a cheap piece of kit called a cable release but nowadays it is more likely to be an electronic gizmo with a higher price tag. I, personally, don't use one but that's because I'm a cheapskate.FocusI'm afraid all the modes and settings that you paid all that money for are all useless when photographing fireworks and auto focus is one of them. If you leave your camera set to auto focus the lens will whirr backwards and forwards in a demented fashion trying to find something to focus on in the black sky.Set the focus to manual and then focus on something in the far distance. Don't just wind the focus ring around to the end of its run, check it against a distant object if you can.Aperture & Shutter Speed - The Technical StuffThe exposure is going to be determined by the intensity of light from the firework which, as it bursts will spread across the sky. So we can only be guided by people who have been successful in the past as there is not way to measure the light at the time. There is TTL metering which can measure the light during an exposure, as it does with a flash exposure but, in the case of fireworks, there is far too much contrast to give a useful reading.The aperture you set depends on the ISO rating (basically the sensitivity to light) for the film or the ISO rating set on your digital camera. At ISO 100 you will need to set the aperture to between f8 and f16. So a good start would be f11 at 100 ISO but be prepared to vary this a little for very bright fireworks. As I mentioned above, the shutter speed needs to be set to b or bulb (bulb refers to the old fashioned type of remote shutter release, on which you literally squeezed and rubber bulb and triggered the shutter with a burst of compressed air). At this setting there is no set time for the exposure, when you press the button the shutter opens and when you release it the shutter closes. So the shutter may be open for several seconds. There is no significant build up of light on the film or sensor as the sky is black and the firework is only lit for a short time at any one spot before it spreads out.

Share this post


Link to post
Share on other sites

If you have a phone, try some thing like taping you cell to a bean bag or put it in a shallow coffee mug. I'm not sure about a remote shutter release. Some phones have a setting there it takes a picture in a couple of seconds. Unless you want to take apart your phone and solder on a cable to you're shutter button (put that's to much trouble for some people.... or is it?) Good luck :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.